FEAL Facade F 35
Facade F 35 is a system for the construction of continuous, self-supporting, fully glazed facade constructions with warm insulation of aluminum profiles. Specially designed facade window openings with pivoting hinges, with pivoting hinges, inside or outside, parallel openings and skylights can be used to open areas. FEAL window and door systems are also compatible with the facade system. The glazing of the continuous facade is carried out with the help of EPDM seals and tightening and covering formations. The cover forms are placed on the clamping strips. Materials resistant to weather conditions, temperature changes, mold and waterproof protective strips that prevent the penetration of water and moisture into the insulation are used as materials of the facade components. FEAL's F35 facade is designed as the narrowest section facade on the market. The F 35 is intended for small or medium-sized projects where narrow aluminum frames and panoramic views are required. The thermal characteristics of F 35 are superior to previous solutions of facade systems and are able to meet the standards of a passive house thanks to the minimized width of the aluminum profile and the possibility of accepting glazing up to 50 mm.
Termo 85 Feal
The TERMO 85 system is intended for the production of windows (opening inward and outward), doors (opening inward and outward) and stationary walls. It is a profile system with thermal break, with basic installation frame depth of 77 and 85 mm. In addition to the basic frame/arm design with straight lines, frame/arm versions with rounded outer lines are also possible. This system meets the criteria of openings for low-energy houses by applying new materials that have extremely good thermal characteristics. The thermal break is achieved with polyamide strips with a low coefficient of thermal conductivity (ÊŽ = 0.210 W/mK) of 34 mm. To further improve the thermal characteristics of the profile, profiled XPS rods (extruded polystyrene - ÊŽ = 0.035 W / mK) are placed in the profile chambers and such profiles are given the letter F. The sealing is done with EPDM sponge which has thermal properties significantly better compared to EPDM seals. Possible types of window opening: with hinges, with rotation, with rotating hinges, with rotating opening inside, rotating around the middle axis. Possible types of door opening: opening from the inside and from the outside. The system is compatible with facade systems. Possibility of choosing 16/13 grooved profiles. The device that is installed in the system is standard for groove 15/20 and groove 16/13.
Cleverle locking cam
​The Clever automatic cam compensates for clearances and offsets between 8.5 and 15 mm compared to the standard shock, simplifying installation and maintenance.
French balconies Feal
The French balcony is a complementary solution to the FEAL series of windows, balcony doors and sliding doors in situations where the installation of classic balconies is not feasible, whether they are openings in a concrete structure or suspended facades.
Considering that safety is the most important task of this system, the system was tested with Pendel impact where it reached the highest category C5, which enables the installation of the French balcony in all categories of rooms according to EN 1991-2-1. .
Installation of this system is quick, simple and effective.
The vertical profiles on which the glass rests are pre-machined in the workshop and only need to be attached with screws to the window or door frame.
The vertical profiles of the French balcony are designed in such a way that their width is smaller than the width of the frame profile, therefore the system is characterized by complete transparency, an uninterrupted view and maximum lighting inside the room.
There is no need for horizontal profiles, but handrails can be installed if desired.
Nova pre - construction rollladen stranggepresst​​​​​
Nova pre - construction rollladen stranggepresst - solar paket​​​​​​​​
Nova Vorbaurollladen stranggepresst - Top-Safe
FNE-1100 Feal
​The solar energy market is in a time of dynamic change. The increasingly rapid development of photovoltaic systems and their implementation requires a simple and flexible substructure.
The FEAL FNE 1100 system features an aluminum substructure designed to create modular support structures with the possibility of mounting on the roofs of family houses for different types of conventional roofs. The materials used were chosen to ensure reliability and durability over time. The construction elements are made of aluminum alloy EN AW-6063 and EN AW-6005.
FNE-1200 Feal
​With the development of photovoltaic power plants and their increasing realization, it requires fast, simple and flexible design of substructure systems.
FEAL FNE solutions enable the acceptance of most commercially available photovoltaic modules and each construction has the ability to adapt to different dimensions of solar panels.
FNE 1200 is a system developed for mounting photovoltaic power plants on flat roofs. The complete solution is designed for quick, easy and clean on-site assembly with no additional on-site machining requirements.
FNE-1300 Feal
​With the development of photovoltaic power plants and their increasing realization, it requires fast, simple and flexible design of substructure systems.
FEAL FNE solutions enable the acceptance of most commercially available photovoltaic modules and each construction has the ability to adapt to different dimensions of solar panels. FNE 1300 is a system developed for mounting photovoltaic power plants on the roofs of industrial halls. The complete solution is designed for quick, easy and clean on-site assembly with no additional on-site machining requirements.
FNE 2000 Feal
​With the development of photovoltaic power plants and the growing realization of the same, it requires fast, simple and flexible design of substructure systems. Feal FNE solutions enable the acceptance of most photovoltaic modules available on the market, and each construction has the ability to adapt to different dimensions of solar panels.
FNE-2000 is a system developed for ground assembly and various types of foundation constructions. The complete solution is designed for quick, easy and clean on-site installation, with no additional on-site machining requirements.
​DS/501 AUTOMATIC SERVO CONTROL WITH DOUBLE HEADS
​General Information
Double-headed cutting saw for PVC and aluminum profiles
Easy and accurate positioning system with servo motor
Automatic tilt movement of the saw heads at 45° and 90°
Angles between 45° and 90° can be adjusted manually.
The saw blade diameter of 500 mm enables cutting 2 profiles at the same time.
Two 2.2 kW motors are used for cutting PVC and aluminum (4.4 kW in total)
15” PLC control system with touch screen
All moving parts of the car go on the rail system
Automatic shut-off safety system
Automatic cutting
Cutting possibilities for long profiles
OPTIONS
Barcode printer
Remote connection support.
Cooling and hydro-pneumatic system for cutting aluminum profiles
Absorbent unit for sawdust collection
​Who Are We
About Our Company
​Our company is a specialized warehouse that offers high-quality products for the manufacture of doors and windows, guaranteeing fast and efficient solutions to our customers' needs.
2014
Viti i Themellimit
282
Completed Projects
29
Professional Employees
35
Business Partners
PARTNERS
